Tel (2842 Products)

Part#: 600-400045

The approximate recommended maximum span lengths for the FDS are:600′ for < 1.00″ OD cable (NESC heavy)300′ for ? 1.00″ OD cable (NESC heavy)Body and top are made from a high-strength, engineered dielectric material. Zine plated bolts with washers secure the top to the body.Inserts are made from a soft, pliable dielectric material that gently grips the ADSS cable.Threads onto standard 5/8″ 11-UNC hot dipped galvanized thru-boltMay be mounted horizontally or verticallyMay be used as a stringing traveler at the structure on up to 10 line angles (20 in certain cases).All components may be reused as desired if in good condition.

Price: RFQ
Part#: 200-110292

Easy assembly/disassembly, no tools requiredProvide an air- and water-tight connection; keep debris out of MicroDuct pathwayColor coded by sizeTested to meet or exceed the stringent requirements of every local Standard for MicroDuct Connectors, for Air Blown Optical FibersApproved for use at 230PSI/16BarLow profile design

Price: RFQ
Part#: 600-300024

Auxiliary eye anchor rod clamps permit an efficient method of adding an eye to an existing anchor rod for attaching an additional guy wireCan be used for pulling eye for guy tensioning

Price: RFQ
Part#: 600-100187

Eliminates the need for thimbles, shackles, links and guy hooksThe broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips13,550 Lbs. minimum tensile strengthForged of high quality steel, hot-dip galvanized

Price: RFQ
Part#: 600-301005

Attaches to pole with Lag Screws

Price: RFQ
Part#: 910-070530

•Exceptional bending strength
•Durable

Price: RFQ
Part#: 200-130045

• Incorporates a tracer wire for signal locating
• Corrosion resistant fibers and conductor
• Accurate sequential foot or meter markings
• Wire conductors can be easily spliced in the field
• 22AWG (Solid) BC Semi-Rigid PVC Insulated 300V
• Conductor diameter 0.025 inches

Price: RFQ
Part#: 500-260023

Category 5E Data Cable
24 AWG 4 Twisted Pair Solid Bare Copper
CMP Rated for Plenum Applications
350 MHz Bandwith
1,000 ft Pull Box

Price: RFQ
Part#: 200-750117

Ribbed inside with dry lube
Reduced coefficient of friction
Flexible for growth
Cost effective repairs and upgrades

*** Sold in Full Reel Quantities Only. ***

Price: RFQ
Part#: 500-345007

Underground Feeder Specialty Wire
12 AWG 2 Cond Solid Annealed Copper
600 Voltage Power Transmission
For Underground, Wet, Dry, or Corrosive Applications
2500 ft Reel

Price: RFQ
Part#: 200-110278

Electrofusion Couplers provide an ideal method to make a fusion weldAll that is required is an electrofusion processor, the electrofusion couplings, and a scraper toolThe fittings are made of polyethylene with heating coils located at the surfaceThis design allows direct heating of the interface between the pipe and the fittingNo allignement or clamping tools necessary

Price: RFQ
Part#: 200-110118

Threaded couplers have threads to screw onto the conduitThey can be standard, reverse threaded or taperedThreaded couplers are simply to install

Price: RFQ
Part#: 900-170006

Provide mechanical and environmental protection for fusion splicesOptimal design for simple and correct fiber entranceHot melt adhesive especially developed for optimal flowTransparent heat shrinkable tube for simple installation verificationShort installation cycle and compatible with most common ovens

Price: RFQ
Part#: 200-700019

Designed to utilize average hand gripping strength to shear cut HDPE conduit.

Price: RFQ
Part#: 900-200017

Electronically marks and relocates buried facilitiesUnique design produces a uniform, spherical RF field in every directionEasily located up to 5 FT away with any modern marker locatorWider field with a signal peak directly above the marker provides precise locationRequires no particular orientation when buriedThe Omni Marker provides greater range than 4-inch ball markers that use a dipole fieldHigh-reliability design lasts as long as your buried plantColor coded by utility application

Price: RFQ
Part#: 600-110026

Used in drop cable installations as an attachment to strand for either accepting the bail of drop wire clamps, or for wrapping the support wire of drop cable
Clamp consists of a set of steel jaws, a 1/4″ diameter “pig-tail” shaped bolt, and a hex nut
The jaws are rolled and stamped from AISI 1018 tempered steel
The bolt and hex nut are formed from Grade 2 Steel
Nut and bolt are hot dip galvanized
Jaws are mechanically galvanized
Attaches to strand ranging in size from 1/4″ to 7/16″

Price: RFQ
Part#: 600-300109

Installed with anchor wrenchAnchor has curvilinear leading edges to help penetrate rocky soils and to reduce damage during installation1″ threads to fit 3/4″ and 1″ diameter Pisa rodAnchors are painted with a black paint4,000 ft-lb torque ratingDoes not include the Anchor Rod

Price: RFQ
Part#: 200-100670

•Manufactured from flexible HDPE makes gradual bends without special equipment
•Continuous lengths reduce joining costs
•Excellent low temperature properties allows installation in cold climates
•Outstanding long term cable protection from shifting ground rock and root impingement
•Provides a permanent pathway simplifies future cable repairs or replacement

Price: RFQ
Part#: 600-100175

Hubbell

Price: RFQ