" Communications"

• Used to mechanically bond ground wire to equipment.
• One hole on front of connector for attaching ground wire.
• Accepts ground wire ranging from #14 – #4 AWG
• Mounting hole accommodates 1/4″ stud.
• Body constructed from high strength Aluminum.
• Set screw is installed with a flat head screwdriver.

• Used to make a bonding connection between two copper ground wires.
• Bolt and nut formed from high-strength corrosion resistant C210 Copper.
• Specially designed pressure bar provides high pull-out strength.
• Under torque, provides high contact pressure between ground wires.
• Smallest two conductors accepted: 16 Str.
• Largest two conductors accepted: 8 Str.
• Min. wire size that can be used with Max. wire size: 16 Str.
• UL listed file under number E479014.

Co-extruded with SuperSilicore™ permanent lining to reduce
friction on cable installsUtilize space in an occupied ductRevitialize existing networks with over-ridesSubstantially reduce construction costs & deployment time

• Made-to-order for easy connection into patch panel
• Constructed with Corning® Bend Insensitive Fiber and best-in-class connectors (STANDARD)
• Sub-unitized to reduce snag points and overall diameter while providing better protection
• Pulling eye on one side (if over 300ft pulling eyes installed on both ends)
• Delivered spooled if over 100ft

•Gel plug for FOSC 450
•4 Cable capacity
•No cable attachment

•Manufactured from flexible HDPE makes gradual bends without special equipment
•Continuous lengths reduce joining costs
•Excellent low temperature properties allows installation in cold climates
•Outstanding long term cable protection from shifting ground rock and root impingement
•Provides a permanent pathway simplifies future cable repairs or replacement

Category 6 Data Cable
23 AWG 4 Twisted Pair Solid Bare Copper
CMP Rated for Plenum Applications
550 Mhz Bandwith
1,000 ft Pull Box

• Cable Type: Cat5e Booted
• Conductor Type: 24 AWG, Stranded Tinned Copper
• Cable Jacket: PVC CM
• Shielding Type: Unshielded (UTP)
• Connectors: RJ45 Male 50m? gold-plated
• Insulation: high density polyethylene, .005″ nominal wall thickness

1.75″H x 19″W 19″
10-32 & 12-24 hardware included

Cable jacket: PVC, LSZH, OFNP, OFNRCable length: 1m, 2m, 3m, 5m….customizedCable color: Yellow, Orange, Aqua, White, Red, Green, 12corlorsActive Device TerminationIndustrial, medical & militaryVideo transmission, Data transmissionTelecommunication and Data processing NetworksFTTH , CATV, LAN, MAN, WAN, Test &MeasuremenSystems Integration for Long Haul, Metro and Access Network

Cable jacket: PVC, LSZH, OFNP, OFNRCable length: 1m, 2m, 3m, 5m….customizedCable color: Yellow, Orange, Aqua, White, Red, Green, 12corlorsActive Device TerminationIndustrial, medical & militaryVideo transmission, Data transmissionTelecommunication and Data processing NetworksFTTH , CATV, LAN, MAN, WAN, Test &MeasuremenSystems Integration for Long Haul, Metro and Access Network

45° Galvanized Rigid Steel Conduit Elbows90° Galvanized Rigid Steel Conduit ElbowsLarge Radius 90° Galvanized Rigid Steel Conduit ElbowsAvailable made in trade size 2 -1/2 to 5Fits IMC and GRC Conduits, Couplings and Nipples

Are dual-purpose accessories to EMC’s U-Guards for use when underground cables are in conduit at the pole. First they shroud the conduit riser and couple the Plastic U-Guard or Steel U-GuardSecond, they provide a protected air inlet for venting the U-Guard riser. This chimney effect venting eliminates the necessity for cable re-rating because of elevated temperatures in the riser

Steel flanged “U” Guards™ are manufactured from 14 gauge steel, with the maximum weight of hot dip galvanizing to be compatible with the life expectancy of standard pole line hardware.Designed to fit with our full range of Adapter Boots and Plastic U-Guards™Our flanged Steel U-Guard™ installs quickly with EMC U-Guard™ FastenersSteel U-Guards™ are part of a low cost alternative to expensive conduit systems

• Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments
• Plug-and-play adapter ports ensure rapid cable installment in the outside plant access section of the network
• Multiport Service Terminals incorporate hardened connector technology that is designed to withstand the rugged outside plant environment

• Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments
• Plug-and-play adapter ports ensure rapid cable installment in the outside plant access section of the network
• Multiport Service Terminals incorporate hardened connector technology that is designed to withstand the rugged outside plant environment

4-pair unshielded twisted pair (UTP) cableLow Smoke, CMP Plenum Rated JacketEasy Pull BoxLength: 1000ftAvailable in Blue and White Color, this product is Blue

For attaching to 3/4″ thru-bolts or threaded end of straight or angle Thimbleye bolts for straight-away head guysDrop-forged galvanized steelNuts are contoured to minimize bending and kinking of guy strand20,050 lb tensile strength

• Consists of 6 precision slitting grooves and 6 precision ring grooves ranging in size from 1.2 mm to 3.3 mm
• One side of the tool performs radial/ring cuts and the other side slits the cable (longitudinal cut)
• Compact design weighing less than 2.5 oz with included tethering hole makes it perfect to use in tight spaces or on the go
• Replacement blade set available, part number: MS-306RB
• Blades last for 5,000 slits/cuts
• All of our MS Series Mid Span Tools are patented for their unique design and functionality. Our MS-426 won the 2019 Cabling Installation & Maintenance Gold award for innovation and our MS-6 won the same prestigious award in 2018!