8 (2842 Products)
Hot forged hex collar provides strong connection to anchor and eyeHot dipped galvanized per ASTM A15316,000 lb. tensile strength
•For use in all outside plant closures
•For sealing around 2 or 4 cables in a single FOSC port.
•Combined cables must not exceed the max port diameter requirement
•Workstand for FOSC Clousres
•Used to hold Closure for splicing
IMSA Specification 51-7 Tube Loop Detector Cable
14 AWG 1 Cond Stranded Bare Copper
For 600 Voltage Power Transmission
2500 ft Reel
Used for splicing applications withoverhead or down guy wireRated to hold a minimum of 90% ofRBS of the strand usedUniversal Grades” are recommendedfor use with Alumoweld, EHS,aluminized and galvanized steelstrandAll Grades” are recommended foruse on common grade, SiemensMartin, high strength utility grade,galvanized and aluminized steelstrand
Used for splicing applications withoverhead or down guy wireRated to hold a minimum of 90% ofRBS of the strand usedUniversal Grades” are recommendedfor use with Alumoweld, EHS,aluminized and galvanized steelstrandAll Grades” are recommended foruse on common grade, SiemensMartin, high strength utility grade,galvanized and aluminized steelstrand
Standards : UL 651/ NEMA TC 2Special Features : Bell EndInside Dia. : 5/8″Trade Size : 1/2″Wall Thickness : 7/64″Nominal Length : 10 ft.Nominal Outside Dia. : 27/34″Material : PVCConduit Type : Schedule 40Basic Material : Nonmetallic
Guy Hook, 1 bolt style, keeps guy wire from creeping downward in wrapped guy applicationsHooks should be used under bolt heads for maximum shear strengthHot dipped galvanized steel 1-Bolt Storm1/4″ x 2″
This single-pole long delay circuit breaker provides reliable circuit protection and accurate circuit control to DC applications. In addition to providing conventional overcurrent protection, each breaker can be simultaneously used as an on-off switch.Aipx LEL or Carling CA1 SeriesSingle Pole80 Vdc maxBullet Terminals
IMSA Specification 50-2 Loop Lead-In Cable
16 AWG 2 Cond Stranded Tinned Copper
For 600 Voltage Power Transmission
2500 ft Reel
• Great for route marking and utility identification ownership
• Safety and environmental
• Overlays for existing signs or flexible line markers
• Reflective and non-reflective sheeting available
• Sequential numbering available
These capstans can be used as end pullers or mid-assist booster pullers that will allow long, straight-through, splice-free pullsOffered with a torque limiter between the drive spindle and the inner hub, factory set at standard 600 pounds-force (2669 N-force), but may be calibrated to other torque values, if requestedCan also be used with Fiber Optic Cable Blowers to place longer lengths of cable without splicingWorking Diameter: 32 in. Working Width: 7.5 in. Weight: 86 lbs.
Power hub anchor rod and eyenut are assembled at the factoryUsed with solid hub or socket drive power hub screw anchorsOne part for both the rod and eyenut simplifies material handling16,000 Lbs. Ultimate Tensile StrengthHot-dip galvanizedU.S. made versions available
•Simple to use
•Multi hole design
•Supports high drop capacities and a full range of cable diameters
•Grommet Kit contains (1) Grommet, (1) Cable Measure Tape, (1) Silicone Lubricant Pack, (1) Set of Plugs (where applicable)
Used to seal vacant or occupied ductsCan be custom ordered to assure exact OD & ID configurations for your project’s application. Available in 1” thru 4” sizes (solid, split and with pre-sized cable openings) Contain no metal partsApplications are for long-term and temporary duct sealingRemovable to allow future duct access Provides sediment infiltration protection, rodent control, and are gas and watertight under normal environmental conditions
• Used for distribution, service bonding, or tap connections.
• “V” grooves properly align ground wires for maximum engagement.
• Bolt and washer formed from 304 Stainless Steel for maximum corrosion resistance.
• Overlapping “lips” on Connector prevent ground wire from escaping.
• Tight compression on ground wires prevents Connector from loosening under vibration.
• Maximum 2 conductors accomodated is #6 SOL.
• Minimum 2 conductors accomodated is #10SOL.
• UL Listed under file number E178438.
•Standard 9-1/2″ Dome Kits provided with (2) 8003692 grommets and (2) 8003693 grommets.
•Butt/Expressed Splice Configuration
•Application: Direct buried, below grade, pole/wall mount or aerial
•Quick to assemble, no special tools required
•Tested in accordance to GR-771-CORE by an independent outside lab
•Available in flame retardant material
•Collar system allows for quick re-entry
•Segmented end plate design provides independent access to every cable
•Flexible grommet sealing technology supports a wide range and quantity of flat or round cable profiles.
4″ Telephone Sleeve to HDPE Adaptor (Bell x Spigot)
MicroDucts factory bundled with a polyethylene oversheath: Configuration 7-WayCost-Effective multiple pathways for one installation cost Ships on a Standard Reel FuturePath is designed for installation using the same tools and equipment that are used for traditional conduit or innerduct. No special tools or equipment are required. Multiple pathways in place for Future growth 20 gauge locate wire making locates easy and reliable
• Cutter Length: 7/16″ (1.11 cm)
• Stripping Hole Diameter: 0.030″ (0.762 mm)
• Overall Length: 6 1/2″ (16.5 cm)
• Material: Carbon Steel
• Weight: 0.411 lb (186.4 g)