Fiber Blower Accessories (2842 Products)

Part#: 200-130000

• Stiff-Tape™ lubricated coating
• Best burn-through (conduit cutting) resistance
• Good blowability into conduit
• Accurate sequential foot or meter markings

Price: RFQ
Part#: 500-100081

Cable Type: Stranded loose tube Construction Type: Non-armoredFiber Type, quantity: 288 Fibers per Subunit, quantity: 12 Jacket Color: Black Subunit Type: Gel-free Subunit, quantity: 24 Total Fiber Count: 288 

Price: RFQ
Part#: 700-072137

• Configuration : Hex, gasket, 12x SC/APC, Fiber Tray, 4x grommets, 2x CClips, ground lug, fiber cradle, fiber ladder
• Low-profile enclosure with 12 fiber splice and storage andconnection of FTTH applications.
• Secure integrated fiber management via SC/APC adapters and Fusion Splice Tray.
• Integrated ratchet cable spool allows for quick and easy slack storage release of outgoing cables without disconnection.
• Pre-connectorized with single mode G.652.D fiber to splice with incoming fiber.
• Snap lock and hex bolt provide secure service provider access 24/7.
• High quality UV-protected PVC made in North America for long-lasting fiber protection in demanding weather conditions.
• Four robust one-inch ports with grommets for protected fiber entry and exit.
• External wall and pole mounting brackets allow for quick and easy deployment.
• UL-listed and industry-standardized for easy implementation.
• FTTH for multi dwelling units
• Inside: H 10.2”/W 8.7”/D 2.4”
• Outside: H 13.1”/W 11.5”/D 3”

Price: RFQ
Part#: 600-200001-2500

Superior corrosion resistance Available in both domestic or imported versions, and in 2500 or 5,000 Reels Galvanized EHS Class A made to ASTM 475A standards or Stainless Steel Options available Available in multiple sizes including 1/4, 5/16, 3/8 and special order for state specific DOT or RUS requirements available

Price: RFQ
Part#: 600-100024

Machine bolt for handing aerial strand and accessories on utility poles5/8″ diameter x 8″ long with 4″ thread length and cone pointIncludes one square nutRated tensile strength is 12,400 lbsHot dip galvanized per ASTM A-153Manufactured in compliance with ANSI C135.1These are often referred to as crossarm or through bolts.Material : SteelType : Machine BoltsDiameter : 0.63″Length : 8″Weight : 0.76lb

Price: RFQ
Part#: 900-012014

SPLICER’S KNIFE & SCISSORS3 – HOLE STRIPPERUTILITY KNIFELINT FREE WIPESFIBER OPTIC CLEANERTUBE CUTTERBUFFER TUBE SLITTERPLIERS & SIDE CUTTERSCAN WRENCHMIX OF CABLE TIESCABLE TAGSFERRULE CLEANING TOOLSSCREW DRIVER SETSPLICE SLEEVESVISUAL FAULT LOCATORCLAMSHELL BACKPACK WITH RIGID BOTTOM, TOOL POUCHES AND LAPTOP SLOT FOR FIELD USE

Price: RFQ
Part#: 100-202134-003

Cable jacket: PVC, LSZH, OFNP, OFNRCable length: 1m, 2m, 3m, 5m….customizedCable color: Yellow, Orange, Aqua, White, Red, Green, 12corlorsActive Device TerminationIndustrial, medical & militaryVideo transmission, Data transmissionTelecommunication and Data processing NetworksFTTH , CATV, LAN, MAN, WAN, Test &MeasuremenSystems Integration for Long Haul, Metro and Access Network

Price: RFQ
Part#: 100-140076

Material: Plastic
Color: Black
Capacity: 12 single fusion splices
Operating Temperature: -20°C to 80°C (-4°F to 176°F)
Operating Humidity Level: up to 100%
Approvals: Telcordia GR-769
Includes: Splice chips, Velcro® dots, foam cable protectors, 4 cable ties and splice tray label

Price: RFQ
Part#: 100-111088

Enclosure Type: Wall Mountable
Dimensions (HxWxD): 2.41 in. x 5.5 in. x 13.125 in.
Material: 16 gauge steel with black electrostatic polyester powder coat paint
Capacity: 2 LGX adapter panel (purchased separately)
Fiber Count: Max. 48 (48 LC, 24 SC or ST)
Includes: 2 splice chip, 2 rubber cable entry grommets, 6 zip ties, 1 Velcro® tie, 2 Velcro® wire management straps, 3 cable management clips, 1 warning label, 2 port identification label

Price: RFQ
Part#: 200-210678

Manufactured from one-piece rigid PVC for durabilityFemale connector type at both ends should seat at the stop for proper positioningUsed to couple lengths of conduit pipeCoupling has a trade size of 4 Inch and measures 4 3/16 Inch x 4 1/2 Inch inner diameter x 5 outer diameterCoupling meets UL651, CSA certification, NEMA TC3, UL file E81590 standards.

Price: RFQ
Part#: 150-140202
Price: RFQ
Part#: 150-140201

•Used to secure closures to poles and walls
•Designed for FOSC 450
•Includes wall hanger bracket, 2 mounting brackets, 2 snaplock clamps, 4 lag bolts, and associated hardware

Price: RFQ
Part#: 150-140081

• Includes: (1) Dome Mounting Bracket, (1) Base Mounting Bracket, (2) Snaplock clamps and FOSC-600 associated hardware•Used to secure closures to strand for aerial hanging •Designed for FOSC 600

Price: RFQ
Part#: 150-110236

•For FOSC 450 fiber splice closures
•12 Fiber splice capacity

Price: RFQ
Part#: 200-310088

Standards: CSA Certified and UL ListedSize: 3″Material: SteelFinish: Galvanized

Price: RFQ
Part#: 100-111085

For use in the LL-500 Wall Mount

Price: RFQ
Part#: 150-100220

•In-Line or Butt Splice configurations
•A variety of applications: direct buried, below grade, pole/wall mount or aerial
•Flexible grommet sealing technology supports a wide range of flat or round cable profiles
•Snap Together design is quick to assemble
•No special tools required
•Accepts cable up to .370 diameter
•Internal organizer manages buffer tube or ribbon cable
•Factory installed permanent gasket allows re-entry and re-use
•A cost effective solution for quick restoration of damaged/cut fiber service drops
•Utilizes the LITE-GRIP® Splice Block System which permits single fusion, mass fusion, mechanical, PLC splitters or a combination of all within one closure

Price: RFQ
Part#: 600-050071

• High, rounded bonnet prevents block kicking under lasher
• Stacks evenly
• Non-binding roller axle allows rollers to “ride easily” and rotate smoothly

Price: RFQ
Part#: 200-100942

Manufactured from flexible HDPE, makes gradual bends without special equipmentContinuous lengths reduce joining costsExcellent low temperature properties, allows installation in cold climatesOutstanding long term cable protection from shifting ground, rock and root impingementProvides a permanent pathway, simplifies future cable repairs or replacement

Price: RFQ
Part#: 200-410045

Used to mount EMT conduits to multiple flat surfacesZinc plated steel construction ensures mechanical protection of the conduit strapsOversized bolt hole design makes aligning the fastener and conduit quick and easy

Price: RFQ